??????

技术文档
当前位置:技术文档

H3C云AP版本刷机操作说明

来源:未知 时间:2020-04-08 13:47
 

     配置步骤

  1、首先升级扩展boot版本,要求boot版本必须为对应版本配套的7.18版本,版本文件中可获取

  启动后Ctrl+B进入bootware,选择7进入bootware操作子菜单

  选择4设置更新bootware方式通过网线

  选择4设置上传配置

  设置上传文件名,此处是更新bootware,需上传boot文件;设置IP地址

  ====================================================

??????  |Note: "." = Clear field. |

  | "-" = Go to previous field? |

  | Ctrl+D = Quit. |

  ============================================================================

  Protocol (FTP or TFTP) :tftp

  Load File Name :wa5300.ipe

  :apwa5300_v7.18.btw

  Target File Name :wa5300.ipe

  :apwa5300_v7?18?btw

??????  Server IP Address :192.168.0.99 10.0.0.233

  Local IP Address :192?168?0?98 10?0?0?2

  Subnet Mask :255.255.255.0

  Gateway IP Address :0?0?0?0

  选择1更新bootware

  Enter your choice(0-4): 1

??????  Loading???????????????????????????Done?

??????  1233920 bytes downloaded!

  Updating Basic BootWare? [Y/N]Y

  Updating Basic BootWare.....Done.

  Updating Extended BootWare? [Y/N]Y

  Updating Extended BootWare.........Done.

  更新完成后选择0退回主界面并reboot

  Enter your choice(0-4): 0

  Enter your choice(0-4): 0

  重启完成后查看bootwre版本为7.18,再次Ctrl+B进入bootware,Ctrl+F格式化flash,此处注意需要格式化,避免空间不足导致版本解压失败

  ****************************************************************************

  * *

  * H3C WA5320 BootWare, Version 7?18 *

  * *

  ****************************************************************************

  Copyright (c) 2004-2019 New H3C Technologies Co., Ltd.

  Compiled Date : Mar 8 2019

  CPU Type : ARM

  CPU L1 Cache : 32KB

  CPU L2 Cache : 256KB

??????  CPU Clock Speed : 710MHz

  Memory Type : DDR3 SDRAM

  Memory Size : 256MB

  Memory Speed : 533MHz

  Flash Size : 32MB

??????  PCB Version : Ver.B

  BootWare Validating???

  Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

  Password recovery capability is enabled?

  Note: The current operating device is flash

  Enter < Storage Device Operation > to select device.

  ====================================================

??????  |<1> Boot System |

  |<2> Enter Serial SubMenu |

  |<3> Enter Ethernet SubMenu |

  |<4> File Control |

  |<5> Restore to Factory Default Configuration |

  |<6> Skip Current System Configuration |

  |<7>BootWare Operation Menu |

  |<8> Skip Authentication for Console Login |

  |<9> Storage Device Operation |

  |<0> Reboot |

  ============================================================================

  Ctrl+Z: Access EXTENDED ASSISTANT MENU

  Ctrl+F: Format File System

  Ctrl+C: Display Copyright

  Ctrl+Y: Change AP Mode

??????  Enter your choice(0-9):

  Warning:All files on flash will be lost! Are you sure to format? [Y/N]Y?????

  ............................................................................

  ..................

  Format success?

  格式化完成后选择3进入ethernet子菜单

  ====================================================

  |<1> Boot System |

??????  |<2> Enter Serial SubMenu |

  |<3> Enter Ethernet SubMenu |

  |<4> File Control |

  |<5> Restore to Factory Default Configuration |

  |<6> Skip Current System Configuration |

  |<7>BootWare Operation Menu |

  |<8> Skip Authentication for Console Login |

  |<9> Storage Device Operation |

  |<0> Reboot |

  ============================================================================

??????  Ctrl+Z: Access EXTENDED ASSISTANT MENU

  Ctrl+F: Format File System

  Ctrl+C: Display Copyright

  Ctrl+Y: Change AP Mode

  Enter your choice(0-9): 3

  选5设置有线网络配置,上传之前需要把胖AP版本文件名改成wa5300-oasis?ipe

  ====================================================

  |Note:the operating device is flash |

  |<1> Download Image Program To SDRAM And Run |

  |<2> Update Main Image File |

  |<3> Update Backup Image File |

  |<4> Download Files(*.*) |

??????  |<5> Modify Ethernet Parameter |

  |<0> Exit To Main Menu |

  | |

  ============================================================================

  Enter your choice(0-5): 5

  ====================================================

  |Note: "?" = Clear field? |

  | "-" = Go to previous field. |

  | Ctrl+D = Quit? |

  ============================================================================

  Protocol (FTP or TFTP) :tftp

  Load File Name :apwa5300_v7?18?btw

  :wa5300-oasis?ipe

??????  Target File Name :apwa5300_v7.18.btw

  :wa5300-oasis.ipe

  Server IP Address :10?0?0?233

  Local IP Address :10.0.0.2

  Subnet Mask :255?255?255?0

  Gateway IP Address :0.0.0.0

  配置完成后选择2,更新主版本文件

  ====================================================

  |Note:the operating device is flash |

  |<1> Download Image Program To SDRAM And Run |

  |<2> Update Main Image File |

  |<3> Update Backup Image File |

  |<4> Download Files(*.*) |

  |<5> Modify Ethernet Parameter |

  |<0> Exit To Main Menu |

  | |

  ============================================================================

??????  Enter your choice(0-5): 2

  Loading.....................................................................

  ????????????????????????????????????????????????????????????????????????????

  ............................................................................

  ............................................................................

  ............................................................................

  ............................................................................

  ............................................................................

??????  ..............Done.

  27445248 bytes downloaded!

  Image file wa5300-oasis-boot?bin is self-decompressing???

  Saving file flash:/wa5300-oasis-boot.bin ...................................

  ?????????????????????????????Done?

??????  Image file wa5300-oasis-system.bin is self-decompressing...

??????  Saving file flash:/wa5300-oasis-system.bin .................................

  ............................................................................

  ????????????????????????????????????????????????????????????????????????????

  ............................................................................

  ............................................................................

  ...........................Done.

  升级完成后选择0退回主界面并且reboot

  ====================================================

  |Note:the operating device is flash |

  |<1> Download Image Program To SDRAM And Run |

  |<2> Update Main Image File |

  |<3> Update Backup Image File |

  |<4> Download Files(*.*) |

??????  |<5> Modify Ethernet Parameter |

  |<0> Exit To Main Menu |

  | |

  ============================================================================

  Enter your choice(0-5): 0

  ====================================================

  |<1> Boot System |

  |<2> Enter Serial SubMenu |

  |<3> Enter Ethernet SubMenu |

  |<4> File Control |

??????  |<5> Restore to Factory Default Configuration |

  |<6> Skip Current System Configuration |

  |<7>BootWare Operation Menu |

  |<8> Skip Authentication for Console Login |

  |<9> Storage Device Operation |

  |<0> Reboot |

  ============================================================================

  Ctrl+Z: Access EXTENDED ASSISTANT MENU

  Ctrl+F: Format File System

  Ctrl+C: Display Copyright

??????  Ctrl+Y: Change AP Mode

  Enter your choice(0-9): 0

  System is starting???

  Press Ctrl+D to access BASIC-BOOTWARE MENU

  Booting Normal Extended BootWare

  The Extended BootWare is self-decompressing.................................

  ?Done?

  ****************************************************************************

  * *

  * H3C WA5320 BootWare, Version 7.18 *

  * *

  ****************************************************************************

  Copyright (c) 2004-2019 New H3C Technologies Co?, Ltd?

  Compiled Date : Mar 8 2019

  CPU Type : ARM

  CPU L1 Cache : 32KB

  CPU L2 Cache : 256KB

??????  CPU Clock Speed : 710MHz

  Memory Type : DDR3 SDRAM

  Memory Size : 256MB

  Memory Speed : 533MHz

  Flash Size : 32MB

  PCB Version : Ver.B

  BootWare Validating...

  Press Ctrl+B to access EXTENDED-BOOTWARE MENU...

  Loading the main image files???

  Loading file flash:/wa5300-oasis-system?bin?????????????????????????????????

  ????????????????????????????????????????????????????????????????????????????

  ...........................................................................

  Done.

  Loading file flash:/wa5300-oasis-boot?bin???????????????????????????????????

  Done.

  Image file flash:/wa5300-oasis-boot?bin is self-decompressing???????????????

  ............................................................................

  ............................................................................

  ............................................................................

  ............................................................................

  ...............................Done.

  System image is starting...

  Startup configuration file doesn"t exist or is invalid?

  Line con0 is available?

  Press ENTER to get started.

  至此设备启动完成

??????  配置关键点

??????  1.需要升级设备bootware版本至7.18

  2.升级完bootware后需要格式化Flash

  3.对应版本文件需要修改成wa5300-oasis.ipe

  云AP是Fat AP。初次使用云AP,给云AP上电后,云AP会默认开启4个无线服务:

??????  l 其中一个称之为管理WIFI,也称内部WIFI,SSID为H3C_XXXXXX,XXXXXX为设备mac地址后六位。管理WIFI供商铺内部员工管理使用,一般在2?4G频段工作,当设备未连接到绿洲时,通过连接管理WIFI在浏览器输入10?40?94?1或myap?h3c?com访问本地web页面可进行本设备下的无线服务管理配置,一旦连接上绿洲,将只能通过绿洲平台进行统一的无线服务配置管理。

  其余3个称为用户WIFI,也称商业WIFI,SSID为H3C_WiFi_1、H3C_WiFi_2、H3C_WiFi_3,不加密,不认证,不隐藏。当设备连接到外网,可为已经连接上用户WIFI的用户提供上网服务。


上一篇:H3C AC注册license后查看信息有误
下一篇:5个选择IP电话的技巧
电子标识编号:20181009000069

电话:028-83252151

传真:028-85259033

咨询热线:15378180513
在线客服
?????????3?????50? ????APP?? ???3??? ????APP?? ????APP?? ????APP?? ???3 ???3 ????APP?? ???3????